Laboratory Bench Drop In Sink/ Easy To Installation With Glue
1.Despription
Except supply epoxy resin worktops, epoxy sink is also one of our products. It is drop-in style sinks, and convenient for user to install and clean spill water. The sinks are top mounted into a recessed cutout eliminating the need for undermount sink support systems. It is not easy to gather the residual chemicals and bacteria.
3. Advantages :
1. Safety: After SGS tested, ONUS products have no formaldehyde or any of noxious materials, it is safety for the user.
2. Reagents Resistance : ONUS’s product can resist many of chemical reagents, it won’t been corrode by the most of chemicals.
3. Durability : ONUS products are monolithic and non-porous, it cannot delaminate or swell.
4. Molded : The molded marine edge is easy to clean and install for user, due to the smoothly and non-porous surface, it won’t hidden bacteria and guarantee the worktops have long life.
5. Repairability : All of our products are monolithic epoxy resin, if there are some scratches on the surface, it can repaired with the sand paper polishing.
4. Property:
| No. |
Test Item |
Test Method |
Result |
| 1 |
Compressive Test |
ASTM D695-10 |
24000psi |
| 2 |
Deflection Temperature Under Load |
ASTM D648-07
Method B |
262℃ |
| 3 |
Density |
ASTM D792-13
Method B |
133.8lb/ft3 |
| 4 |
Flexural Strength |
ASTM D790-10
Method A |
12200psi |
| Flexural Modulus |
2350000psi |
| 5 |
Horizontal Burning |
ASTM D635-10 |
Classification:HB |
| 6 |
Rockwell Hardness |
ASTM D785-08
Procudure A |
HRM98.3 |
| 7 |
Water Absorption |
ASTM D750-98(2010)e1 |
0.031% |
| 8 |
High Temperature Resistance Test |
_ |
No bubbles,rupture,deformation on the surface |
| 9 |
Fire Resistatnce Test |
_ |
No bubbles,rupture,crack on the surface |
Product Tags:
|
|
Laboratory Bench Drop In Sink 15mm Thickness Easy Installation With Glue Images
|
