Laboratory Epoxy Resin Worktops Use in Centre Bench With Chemical
Our company specilize in supplying epoxy resin products for
laboratory furniture, our office site in Shanghai, we are
manufacturer and have own factory. We have advanced technology and
professional staff to meet kinds of need from our customers. Our
company through certificate of ISO9001 and SEFA.
All of our basin station worktops are monolithic epoxy materials,
there are molded marine edge to stop spill chemicals. The common
color is black, we can also customize color according to client’s
need. The surface is glare finish, we can change to matt surfaces
if customer request.
Advantages of this one is easy to install and clean. Of course, it
has perfect properties on resisting chemicals and heat.
|Chemical Test Results for Black|
|15||Dichlor Acetic Acid||0||0|
|33||Sulfuric Acid,77% and Nitric Acid 70%,|
|37||Zinc Chloride, Saturated||0||0|
|Rating scale:||Level 0--No detectable change|
|Level 1--Slight change in color or gloss|
|Level 2-- Slight surface ething or severe staining|
|Level 3--Pitting,cratering,swelling, or erosion of coating.Obvious
|Acceptance level:||Laboratory grade finishes shall result in no more than four level 3
Suitability for a given application is dependent upon the chemicals
used in a given laboratory
1. Heat Resistance : ONUS’s worktop can resist 262℃ , it won’t foam and crack, the fire
can extinguish because it has no any of paper materials.
2. Mositure Resistance : Due to our products are monolithic, it won’t swell and distortion
on the mositure area.
3. Reagents Resistance : ONUS’s product can resist many of chemical reagents, it won’t been
corrode by the most of chemicals.
4.. Durability : ONUS products are monolithic and non-porous, it cannot delaminate
Epoxy resin worktops are use in all kinds of laboratories. In view
of the rigid request for laboratory, epoxy resin worktops are vey
popular in laboratory industry, it is the best choice for lab
staff. The laboratory include the following: